Hello. I want to install a TRD lower front brace (PTR041700102) on my 2005 Spyder. See below
. My problem is that it will not install unless I remove the factory bracing (new components in pic below, provided by the Spyder King, Phats).
My question is whether you think that this is a good idea (I already bought the brace) if my goal is to better brace this area. Thanks in advance! Keep in mind that I am a noob at this so do not worry about "talking down to me" if there is something I need to know.
2007 S2000 (New Formula Red)
2005 Spyders (Two in Paradise Blue Metallic, One Super White)
2004 Tundra SR5 Double Cab (White with 2UZ-FE Engine)
2003 Tundra SR5 Access Cab (Silver Stepside with 2UZ-FE Engine)
2003 Sequoia SR5 (Black with 2UZ-FE Engine)
1970 Olds 442 W30 (Nugget Gold )
Topic starter
Posted : August 11, 2019 6:49 pm
As far as I understand, that front TRD brace won't fit the 04+ cars with the factory bracing. You are probably better off with the OEM bracing.
2000 Toyota MR2 Spyder, 2021 Lexus UX 250h F Sport
Posted : August 12, 2019 9:37 pm
The brace should install if you remove the 3 bars in the "middle". It replaces those and adds another lateral bar up front. You will leave the meaty looking metal pieces there, but remove the 3 tubular bars. keep the hardware though since you might need to re-use them.
Get your Short Antennas, Decals, and all sorts of goodies at:
https://takubanmotorsports.com
Posted : August 13, 2019 10:55 am
I really want the BeatRush front setup.
Posted : August 13, 2019 6:00 pm
This is what I thought might work. I will try it and report.
2007 S2000 (New Formula Red)
2005 Spyders (Two in Paradise Blue Metallic, One Super White)
2004 Tundra SR5 Double Cab (White with 2UZ-FE Engine)
2003 Tundra SR5 Access Cab (Silver Stepside with 2UZ-FE Engine)
2003 Sequoia SR5 (Black with 2UZ-FE Engine)
1970 Olds 442 W30 (Nugget Gold )
Topic starter
Posted : August 17, 2019 3:04 pm
LordTakuban reacted